How to Choose a Prop Guard for Your Coach Boat

Choosing a prop guard begins with your engine and propeller measurements. Horsepower is a useful starting point, but it does not confirm that a particular guard fits your boat.

Gather the details before shopping

  • Engine manufacturer, model, year, and horsepower.
  • Propeller diameter and the clearances shown in the manufacturer’s measurement guide.
  • Whether your engine uses a Big Foot or High Thrust lower unit.
  • Your boat’s operating speed and intended use.

Photographs of the engine and lower unit can help when asking a dealer about fit. Use the Prop Guard manufacturer’s measurement guide for the measurements specific to this product.

Compare the model, then confirm the fit

Safe Lakes carries Prop Guard models from 9 to 16 inches. Our Prop Guard sizing guide provides general engine ranges and notes for Big Foot and High Thrust applications. Use those ranges to narrow your options, then confirm dimensions and clearances.

The manufacturer specifies that its 9-, 11-, 13-, and 14-inch models are for vessels that do not exceed 35 mph. Review the current instructions for the model and application you are considering.

Check before drilling

Read the installation instructions and verify the fit before making permanent changes. If you are uncertain about the application or installation, consult a qualified marine dealer.

Under Safe Lakes’ return policy, a Prop Guard must not have been drilled to be eligible for return. Confirm your selection before installation.

Keep the whole operating routine in view

A guard is one part of your boat’s equipment. Continue to use your engine cut-off switch link as directed, maintain a lookout, and follow your program’s procedures when people are in the water. Do not treat a guard as permission to approach swimmers with the engine running.

Need help selecting a model?

Send Safe Lakes your engine details and measurements, or include them in a fleet quote request.

Shop Prop Guards · Review the coach boat checklist